For the safe use of the machine, the machine system shall be maintained normally through

virus protection.

u Basic items to be observed for virus protection are as follows:

n Install the anti-virus program (TrusLine) provided by us so that any virus can be

treated by performing a virus check periodically. When installing the program,

contact our C/S (STS) or local agent.

n Run the anti-virus program and check for viruses without fail before starting the

machine and preparing production. Running the anti-virus program during

production may affect the performance of the machine.

n Update the anti-virus program engine periodically. Use a PC without a virus as an

update server when updating the anti-virus program engine for the machine

system.

For the corresponding PC, update the anti-virus program engine periodically

through the Internet and perform configuration in the ant-virus program to update

the anti-virus program engine of the machine by sharing the folder in which the

updated file is saved with the machine system.

n When loading a PCB file or saving it in the system using storage media including

USBs, perform an anti-virus check first on the corresponding storage media and

check for any problems.

n When using a shared folder in the machine system as necessary, set the password

for the shared folder without fail.

About This Manual

u Composition of this Manual

The manual for this machine is comprised as follows.

n Handbook

Ø Operation Handbook

Describes briefly a series of processes that is performed by the operator.

Ø Maintenance Handbook

Describes briefly basic points related to maintenance of the machine;

Preparation for maintenance, daily inspection, periodical inspection, cleaning

and lubrication method, definition of consumables including replacement time

and method.

n Administrator’s Guide

Describes the program for PCB production or various system setups related to the

machine;User’s account administration and authority setup, board definition,

component registration, feeding device setup, step programming, optimization,

production setup, teaching and placement test, machine calibration, system setup,

machine diagnosis, utility menu setup and production information management

Troubleshooting Guide

Describes definition and the method used to take measures against the errors;

Describes definition and solution for error codes and the errors not defined

n Programming Tutorial

Provides a description of the machine operation processes in detail through several

examples;

Chip placement on general board, placement of odd-type component on array

board, and placement of odd-type component through import

n Technical Reference

Provides part information for the maintenance and various technical drawings.

u Symbols other than safety marks used in this manual

The meanings of symbols used in this manual are as follows:

Reference

Reference indicates a part to be referred to.

Memo

Describes useful information related to the text or definition of terms.

Keywords:

SMT pick and place machine, JUKI RS-1R pick and place machine, JUKI RX-7R pick and place machine, JUKI Pick and place Machine, Samsung Pick and Place Machine, Hanwha SM481 Plus Pick and Place Machine, SMT482Plus, SMT 471Plus, SM321, SM421, SM451, SM485, SCM-1, SLM100, SLM120, EXCEN PRO M, DECAN F2, DECAN L2, DECAN S2, DECAN S1, HM520,  Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine, Samsung SMT Mounter, Samsung Chip Mounter, Samsung Chip Shooter, Samsung Chip Placement.

We provide SMT solutions at various stages according to the different needs of customers. We are not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.

Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information: WhatsApp/ Skype / WeChat: +86-13670124230，Email: etasmt@foxmail.com